Just A Few Natural Jewellery Cleaner Recipes (2024)
, by Nellie Lee Luhrmann. 13 Comments
THE BOTTOM LINE IS
Whichever type of jewellery you own, gentle cleaning and maintenance is necessary to keep its shine. Air and water oxidize metals and can make them dull. Keep them looking new with periodic cleaning and you will keep your jewellry looking good longer. Save money and the environment by making your own inexpensive jewellery cleaner using items from your pantry/laundry cupboard.
Combine ingredients in a bowl and mix well. Pour into a glass jar and cover tightly. Label jar for future use and keep out of reach of children. To use, soak jewellry in the solution for 1-10 minutes (depending on how tarnished it is). Swish intricate pieces in the solution to get into the cracks/crevices. Use a toothbrush or a well-washed mascara brush for hard to reach places. Rinse and dry with a soft clean cloth. Don’t soak pearls in this solution. Rub them gently with a soft chamois cloth dampened in the solution. Do not combine this solution with chlorine bleach – hazardous fumes will result!
Soapnuts can be used to clean gold jewellery or alternatively you can………
Pour cider vinegar in a shallow glass container. Place gold jewellery in the vinegar so that it is covered completely. Don’t overlap any different pieces or parts of chains. Let the jewellery sit in the vinegar for 15 minutes. Remove the jewellry and wipe clean with a soft, clean cloth. The gold should be completely clean.
CLEANING SILVER JEWELLERY
1. Line a glass bowl with aluminum foil, shiny side facing outward. 2. Place the jewellry you want to clean in the bowl making sure it’s touching the foil 3. Cover the jewellry with baking soda – just enough so that you can’t see it. 4. Add boiling water – enough toimmersethe jewellry. 5. Let soak for 3 to 5 minutes ( or less if it’s not really dirty). 6. Use tongs or a fork to lift out the jewellry ( you don’t want to get burned) and rise under cold water. And voila ………. you have sparkling jewellery. If the jewellry is very dirty or very tarnished – like silver or gold – then you may need to repeat the process so just add a little more baking soda and more boiling water – but make sure it’s boiling, that’s key.This method works great on sterling, silver, gold, costume jewellry metals, even Technibond Jewellery . But do be careful if you’re got a lot crystals glued into a setting and limit soaking to no more than 90 seconds – or you might melt the glue. Also,don’timmersenatural pearls in this solution –it’s too caustic. It is however, fine for most gemstones and works wonders on cubic zirconia And in case you’re wondering ….it also works fab for cleaning silverware, silver frames or any silver home decor.Although silver can be cleaned very easily with a bath ofbaking soda and water with a piece of aluminium as mentioned above if you don’t have aluminum on hand, you can use white distilled vinegar. Mix 2 tbsp. baking soda in 3.4 fluid oz. or almost 1/2 cup (100 ml) of vinegar. Soak silver items in the mixture for 10 minutes. Rinse thoroughly with water and dry the items with a soft, clean cloth. Repeat if necessary
CLEANING COPPER, PEWTER & OTHER METALS
Dissolve 2 tsp. of salt in a cup of white distilled vinegar. Place a few tablespoons of flour (any kind) into a shallow container. Add some of the vinegar mixture to the flour until it forms a paste. Spread a thick layer of the paste on the metal that needs to be cleaned. Let stand for 15 minutes. Scrub clean with a soft, clean cloth.
CLEANING PLATINUM JEWELLERY
A recommended natural way to clean platinum is to make a mixture of half ammonia and half water. Let the platinum soak in the mixture and then polish with a soft cloth. Be careful if the jewellery contains gemstones other than diamonds. The mixture may discolor or harm gemstones other than diamonds.
Pour 1 cup of hot water (not boiling) over the mix and stir until dissolved. Leave your jewelry to soak in the solution for 10-15 minutes. By combining each of these components (aluminium, bicarbonate of soda and salt) a chemical reaction happens, helping lift the oxidisation off of your silver.
Pour 1 cup of hot water (not boiling) over the mix and stir until dissolved. Leave your jewelry to soak in the solution for 10-15 minutes. By combining each of these components (aluminium, bicarbonate of soda and salt) a chemical reaction happens, helping lift the oxidisation off of your silver.
Combine Vinegar and Baking Soda: Mix 1/2 cup white vinegar and 2 Tbsp.baking soda together, then let your silver jewelry soak in the mixture for two to three hours before rinsing and polishing.
If your piece is still visibly dirty, you can soak it in a mixture of vinegar and baking soda (about one part baking soda to four parts vinegar) for an hour or so before rinsing and polishing with a cloth.
Baking Soda. Baking soda is abrasive, which is why it's great for cleaning sinks and toilets, but that abrasive quality can scratch gemstones and precious metals. ...
If you'd like to disinfect your jewelry, you can use regular household isopropyl alcohol or hydrogen peroxide, as long as the jewelry is solid gold or platinum and is only set with diamond, ruby, or sapphire. Take care with any other kind of stones and use a gentler form of cleaning.
Ultrasonic jewelry cleaning is used for diamond and gemstone cleaning. It uses high-frequency sound waves and cleaning solutions that create bubbles that latch on to the dirt on the diamond. The sound waves release the dirt from the diamond.
Diamonds gain their characteristic sparkle by using lasers to scrape away their dull, rough outer surface and create and polish angled facets that allow them to sparkle.
Originally Answered: How did they polish silver a long time ago? Mild abrasive pastes and powders have been known for eons. Such pastes and powders are used for polishing metals and for buffing them to an even shinier finish. "Jeweler's rouge" abrasive in a soft wax can be applied to a soft cloth or buffing wheel.
Add boiling water and baking soda to a bowl layered with aluminum foil. Remove after 1-3 minutes, rinse under cool water and rub dry with a soft cloth. This process causes a chemical reaction that removes tarnish from the silver within second or minutes.
You can clean tarnished silver (even heavily tarnished pieces) with a simple homemade solution, and you likely already have all the ingredients that you need. Cleaning silver with a combination of aluminum foil, baking soda, and salt typically does the trick for both small and large silver pieces.
This method for cleaning silver with baking soda, hot water and aluminum foil works best for smaller items, such as flatware, napkin rings, or silver jewelry. The tarnish disappears as if by magic due to an electrolytic reaction which transfer the oxidized tarnish from the silver to the aluminum foil.
A couple common household items with tons of uses are good old vinegar and lemon juice. Their chemical make-up can do wonders on a number of cleaning projects but your jewelry shouldn't be one of them. Sure it can get your jewelry clean, but the acidity and abrasiveness can damage silver.
Coins and jewelry that have started to gather an unsightly tarnish can be cleaned with nothing more than a can of co*ke. If, for some reason, you care about how shiny your pocket change is, simply drop the grimy coins in a co*ke bath and leave them overnight.
Once dirty, it can easily be forgotten at the bottom of a jewelry box. If you are looking for a simple solution to cleaning your silver jewelry, vinegar is a great way to go. There are a number of vinegar-based cleaning solutions that will bring the sparkle back to your silver jewelry.
Yes, you can clean gold with hydrogen peroxide. It is a safe and effective way to remove dirt and tarnish from gold jewelry. However, it is important to remember that hydrogen peroxide can damage some types of gold, such as those that are plated or have gemstones set into them.
Dawn dish soap is safe and effective at cleaning jewelry. Just add a few drops to a warm basin of water and let your jewelry soak for 15-30 minutes. Then remove it from the basin and gently brush with a clean, soft-bristled toothbrush to get grime out of the grooves. Finally, rinse and dry.
Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
dampened in the solution. Do not combine this solution with chlorine bleach – hazardous fumes will result!