How to Pass a Smog Test: 13 Steps (with Pictures) - wikiHow (2024)

Explore this Article

Co-authored byTom Eisenberg

Last Updated: April 5, 2021References

Download Article

1. 1

   Repair your car if it isn’t running correctly. If you know your car needs repairs, get it fixed before taking a smog test. Find an auto mechanic in your area to get a diagnostic test for your car. Have them fix the issue or repair it yourself so you don’t waste time and money on a failed smog test.^[2]

   • When the “check engine” light is lit on the dashboard, your car will usually fail the test.
   • Problems, such as a faulty oxygen sensor, become more serious and costly when left untreated.
2. 2

   Drive the car for at least a week after the battery is disconnected. The battery is typically disconnected during repair work. This resets the car’s internal computer, which deletes the computer’s diagnostic reports. Drive the car for 100 to 200mi (160 to 320km) over the course of a week or 2 before the test.^[3]

   • The smog test technician will retrieve the diagnostic reports from the car’s computer during the test.

   Advertisem*nt

3. 3

   Get an oil change if the car needs it. An oil change is only needed if your car is near the next scheduled service. Oil changes are typically recommended every 3,500-5,000 miles for conventional oil or every 7,500-10,000 miles for synthetic oil.^[4] Old oil releases pollutants that can cause your car to fail the test.^[5]

   • If you have a technician do it, ask them to look for cracks in the car’s hoses.
4. 4

   Check the engine’s coolant level. This is done by opening the car’s hood and unscrewing the radiator cap. The fluid level should be near the top of the tube. During the test, your car will stay in place and have less air flowing to cool it.^[6]

   • This fluid may be replaced during any repair work or oil change.
   • Coolant helps prevent your engine from overheating.^[7]
5. 5

   Get a pre-inspection to save money. Pre-inspections are done at the same facilities as the official tests. Ask the technicians to have a pre-inspection. They’ll give your car the official smog test, but the results won’t be reported to the government. This is cheaper than the official test and should be done when you’re unsure the car will pass it.^[8]

   See Also

   What is a Smog Check?Elektrosmog Schutz » Diese Produkte helfen wirklich + RatgeberEmission Test: Ensuring Your Vehicle's Environmental Compliance | Emissions.org

Advertisem*nt

Download Article

1. 1

   Inflate the car’s tires before the test. Many smog tests include a dynamometer test, which rotates your tires at high speeds. Most gas stations have air pumps you can use to fill the tires.^[9]

   • Properly inflating the tires means less stress on the engine during the test since your car will be more stable.
2. 2

   Get a full tank of gas before going to the test. Some dynamometer smog tests hold the car at an angle. This exposes the fuel pump, which can mean a test failure due to more vapor in the fuel line. Keep the tank as full as possible before going to the testing facility.^[10]

3. 3

   Avoid taking the test on a rainy day. Wet tires can cause the car to slip off the dynamometer, leading to a false reading and failure. The testing machines will dry your tires, so you can still complete the test on a rainy day. However, it’s better to avoid the risk and wait for better weather.^[11]

4. 4

   Use fuel additives to clean the fuel lines. Fuel additives can be purchased at auto parts stores. Follow the directions on the bottle to add the additives to the car’s gas tank. This is usually done during refueling.^[12]

   • Most gas is already treated with some additives. However, extra additives can help your car pass the test.
5. 5

   Drive 20 minutes before the test. If the testing facility is around the corner from your house, avoid going there immediately. The drive will warm up your engine, ensuring that it’s operating as efficiently as possible.^[13]

6. 6

   Take the test at a registered facility. Go to your area or state government’s website. Certified stations are operated all over the area, so you most likely won’t have a problem finding one close to you. Some of the stations may even be able to repair your car after the test.^[14]

   • For tests in California, for example, go to https://www.bar.ca.gov/pubwebquery/station/stationlist.aspx.
7. 7

   Take the test results to a repair shop if the car fails. At the end of the test, the technician will give you a printout. Hand the printout to a repair shop so the technicians there can diagnose your car and make any necessary repairs.

8. 8

   Retake the smog test until the car passes. After a failed test, you’ll usually be given a few weeks to fix the car without penalty. Adjust the car as needed, then return to the testing facility. Continue doing this until your car officially passes the test.^[15]

Advertisem*nt

Expert Q&A

Ask a Question

Tips

9 votes - 67%